This publication is for ECO3 measures installed on or after 1 October 2018.
Under the Energy Company Obligation (ECO3) a wide range of energy efficiency measures can be installed. The measures table provides the measure type names that energy companies must use when they notify ECO3 measures, as well as some additional information for each measure.
ECO3 Measures Table
The ECO3 Measures Table provides information on eligible energy efficiency measures which suppliers can use to meet their obligations for measures installed from 1 October 2018 until 31 March 2022. The table includes the following information for each listed measure:
- measure category
- measure type
- eligibility under ECO3 HHCRO obligations
- standard lifetime
- relevant PAS annex
- measure name: format for notification to Ofgem.
Additional information has also been provided for some measures. The list of measures is non-exhaustive.
Please note that the measure types listed are those which are present in the deemed scores matrix. District heating systems have also been included, but these must be scored with SAP/RdSAP. Other measures may qualify, subject to review by us on a case-by-case basis.
Some measures which were present in previous versions of the table have been removed as they do not have deemed scores. These measures are still eligible for ECO, and if suppliers wish to install these measures they should contact us. For more information on the process of applying for new scores or non-standard lifetimes, please consult our ECO3 Guidance: Delivery.
This document is a large .pdf file. As such we recommend you adjust your settings to A3 Landscape if printing. Please consider the environment if choosing to print the document.
Update 4 December 2018 (Version 3.1)
The version 3.1 (December 2018) of this document was created to clarify relevant PAS annexes for solid wall insulation, conditions for park home insulation and heating controls in registered social housing.
Update 8 August 2019 (Version 3.2)
Version 3.2 was created to include ‘Cavity wall insulation - Partial fill' and Footnote 9 to clarify when oil boilers can be installed.
Update 12 September 2019 (Version 3.3)
Version 3.3 was created to correct the lifetime of ‘Cavity Wall – External/Internal Insulation’ to 36 years. This aligns with the ECO3 Deemed Scores.
Update 18 December 2019 (Version 3.4)
Version 3.4 was created to include the ‘Solid floor insulation’ and ‘Compensation’ measure types, and to amend the External / Internal Wall Insulation measure category label (previously Solid Wall Insulation). The measure type labels within this category have also been updated for greater clarity.
Update 11 February 2020 (Version 3.5)
Version 3.5 was created to align with the ECO3 Improving Consumer Protection amendment order. This made FTCH eligible in PRS F&G properties.
Update 20 August 2020 (Version 3.6)
Version 3.6 was created to include annexes for both PAS 2017 and 2019, and to clarify that Electric Storage Heaters are eligible in PRS FG, only where the property has Solar PV. Footnote 10 was also added to clarify eligibility requirements for FTCH DHS installations.
Update 19 April 2021 (Version 3.7)
Version 3.7 was created to include the B7 (Hybrid Wall Insulation) PAS Annex for EWI, IWI, and CWI measures. Footnote 4 was updated to include fuel cell mCHP as a renewable heat source.
Update 4 June 2021 (Version 3.8)
Version 3.8 was created to include the new Time and Temperature Zone Control (TTZC) measure type in the other heating measure category.